Home Contact Sitemap Checkout

We DeliverWe Deliver To Your Door  
address phone
address Find Us phone Call Us
address address

Print This Page

Seal Signature Series Natural Stone
not available for sale

$72.32

GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER is a color enhancer and is made of silicone based polymers. This sealer penetrates deep into the natural stones, therefore helps prevent the oil and dirt penetration, corrosion from de-icing salt and the effects from the UV rays.


Product Features

  • Non film-former
  • Vibrant color enhancer
  • Darkens the color (wet look)
  • Apply on dry surface only
  • Works at above 40°F (4°C)
  • Rain-safe after 24 hours
  • Easier to clean and maintain
  • For use on salt-water pool patio areas
  • Water-based, Zero Gloss
  • UV-resistant
  • Stain protection
  • Helps resist corrosion from de-icing salt, effects from UV rays, motor oil and grease stain


PLEASE NOTE
  • Natural stones should only be sealed 60 days after their installation date. Consult natural stone manufacturer’s for their recommendation.
  • Natural stones and jointing sand MUST be 100% dry.
  • Temperature should be between 50°F (10°C) and 80°F (27°C) when sealer is applied.
  • Natural stone surface must be cool to the touch when sealer is applied (ambient temperature between 50°F (10°C) and 80°F (27°C)).
  • First clean natural stones with Gator Clean products. Remove all oil, grease and rust stains.
  • Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
  • Use just one (1) layer of GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER.
  • When using GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER, assure yourself at least 48 hours of dry conditions prior to applying the sealer.
  • Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer
  • Wear protective gloves, eye protection and respiratory protection.
  • Always keeps surfaces dry and clean to reduce slip-fall accidents. This sealer is not anti-slip. Precautions should be taken around pools and showers.
  • Do not let it dry (white film or slippery residue may form). If not wiped dry after 5-10 minutes, residu may form. Do not pressure-wash. Not resistant from acids or caustic chemicals. Do not dilute. Not for food handling surfaces. Not for glazed tile or non-porous surfaces. Apply between 50-80°F (10-27°C). Dry residue after a long period may be removed by adding more sealer or mechanically.